Knowledgebase

User Tools

Site Tools

You are here: HOME » a3_documentation » lcvp_mk5 » howto_ramp_at_waypoint_or_trigger
a3_documentation:lcvp_mk5:howto_ramp_at_waypoint_or_trigger

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
a3_documentation:lcvp_mk5:howto_ramp_at_waypoint_or_trigger [2025/05/14 16:45] – rocka3_documentation:lcvp_mk5:howto_ramp_at_waypoint_or_trigger [2025/05/14 17:00] (current) – rock
Line 1: Line 1:
-====== How do I animate the ramp at a waypoint or trigger ======+====== LCVP: How do I animate the ramp at a waypoint or trigger ====== 
 On the LCVP there are really only three animatable parts. Some of these are made up of multiple components so its better to use animatesource rather than just animate. This will move the objects without breaking the timing etc: On the LCVP there are really only three animatable parts. Some of these are made up of multiple components so its better to use animatesource rather than just animate. This will move the objects without breaking the timing etc:
  
-Ramp = 'ramp_source' +  * Ramp = 'ramp_source'  
-Masts = 'folding_mast_source' +  * Masts = 'folding_mast_source'  
-Covers* = 'cover_source' +  * Covers* = 'cover_source' 
-NOTE: I wouldn't recommend animating the covers in the ViV versions. They will clash with the cargo and cause both cargo and boat to explode.+ 
 +**NOTE: **I wouldn't recommend animating the covers in the ViV versions. They will clash with the cargo and cause both cargo and boat to explode.
  
 You can control any of the animated parts of the model via waypoints in the missions. To do this you need to: You can control any of the animated parts of the model via waypoints in the missions. To do this you need to:
  
-Give the LCVP a variable name, eg 'lcvp1' +  - Give the LCVP a variable name, eg 'lcvp1'  
-Place a Waypoint. (IMPORTANT NOTE: If you want to unload vehicles you need to use the "Vehicle Unload" Waypoint type). Tweak the variables as much as you like, activation size is key. +  - Place a Waypoint. (IMPORTANT NOTE: If you want to unload vehicles you need to use the "Vehicle Unload" Waypoint type). Tweak the variables as much as you like, activation size is key. 
-In the activation field type: lcvp1 animatesource ["ramp_source", 1] +  - In the activation field type: lcvp1 animatesource ["ramp_source", 1] 
-Close the dialog and try it. The number controls the phase of the animation. So 1 for open 0 for closed. +  - Close the dialog and try it. The number controls the phase of the animation. So 1 for open 0 for closed. 
-{{:a3_documentation:lcvp_mk5:800px-lcvp_ramp.jpg?nolink|}}+ 
 + {{:a3_documentation:lcvp_mk5:800px-lcvp_ramp.jpg?nolink}}
  
 You do have to be careful about the size of the zones. If the LCVP passes through the waypoint in the wrong order it may have problems opening and closing the ramp. You do have to be careful about the size of the zones. If the LCVP passes through the waypoint in the wrong order it may have problems opening and closing the ramp.
 +
 +
a3_documentation/lcvp_mk5/howto_ramp_at_waypoint_or_trigger.1747241141.txt.gz · Last modified: by rock

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial 4.0 International
CC Attribution-Noncommercial 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki